FO-V2344/V2348

Single Sided Thermal Break Tape (1/4″ and 1/8″ thick)

Volume Pricing

    Save when you buy cases!

    FO-V2344 and FO-V2348 are single-sided thermal break tapes, designed to reduce thermal bridging on outer and inner framing in metal buildings. Available in 1/4 inch and 1/8 inch thicknesses, the tape has excellent holding power and high-load capability.

    Features & Applications

    Applications for the Tape

    The most common applications for the single-sided thermal break tape include:

    • create a vapor seal where large gaps occur
    • create a lap joint seal on corrugated metal building panels or prefabricated wall panels
    • create a flash break on building purlins and girt flanges
    • maintain a seal in high movement joints
    Features of the Tape

    Features of the single-sided thermal break tape include:

    • adheres strongly to smooth and rough surfaces (including corrugated metal)
    • easy to apply
    • sticks quickly (which speeds up application)
    • conforms well to irregular surfaces
    • easy to die-cut for custom sizing
    • the paper release liner protects the adhesive from contaminants when cutting the tape to specific lengths
    Tape Adhesive

    The tape has an acrylic adhesive.

    Tape Sizes

    The single-sided thermal break tape is available in the following sizes:

    • 2 inches by 50 feet (1/4 inch thick)
    • 3 inches by 50 feet (1/4 inch thick)
    • 2 inches by 75 feet (1/8 inch thick)
    • 3 inches by 75 feet (1/8 inch thick)
    Tape Colors

    The single-sided thermal break tape is available in gray.

    Who Uses the Tape

    The tape is most commonly used by:

    • construction professionals
    • building contractors
    • insulation contractors
    • metal building specialists
    ECHOtape Part Number

    The part numbers for this tape are FO-V2344 (1/4 inch thickness) and FO-V2348 (1/8 inch thickness).

    Click here for other types of insulation tapes.

    Technical Data

    SIZES ¼ in x 2 in x 50 ft
    ¼ in x 3 in x 50 ft
    1/8 in x 2 in x 75 ft
    1/8 in x 3 in x 75 ft
    CARRIER PVC Foam
    ADHESIVE Acrylic
    RELEASE LINER #70 Polycoated Paper
    TOTAL THICKNESS 1/4” (FO-V2344) | 1/8” (FO-V2348)
    TENSILE 60 PSI
    ADHESION 20 oz/in
    SERVICE TEMPERATURE -20°F to 130°F (-29°C to 54°C)
    ELONGATION 120%
    COLOR Gray
    COMPRESSION DEFLECTION 5 PSI
    R VALUE 1.15 (1/4”) | .576 (1/8”)
    HOLDING POWER >24 hours @ 2.2psi load, R.T.

    Where To Buy

    Have a Product Question?

    We’re here to clear up any questions you have before purchasing.